Vertical Filter Press Machine

Our innovative vertical filter press represents a revolutionary approach to industrial filtration, delivering superior dewatering performance while minimizing floor space requirements. Engineered specifically for facilities with limited horizontal space, this vertical configuration maintains the exceptional filtration capabilities our customers expect while addressing crucial space constraints.

Vertical Filter Press Manufacturer

Type: Vertical filter press
Capacity: 1-40 ton/hour
Weight: 5 tons
Size: 5x2x2 m
Applications: nickel fine filter ore, zinc oxide leaching solution, enzymes, starch,
caustic sludge, zeolite, copper concentrate etc

Vertical Filter Press Introduction

The automatic vertical filter press, also called the filter cloth-run type fully automatic filter press, is a type of machine that filters materials. This type of filter press first appeared in the former Soviet Union in the 1960s. Later, Germany, Finland, the United States, and other countries started researching and manufacturing it. It is widely used to filter nickel, fine filter ore, zinc oxide leaching solution, enzymes, starch, caustic sludge, zeolite, and copper concentrate, among other things.

Vertical Automatic Press Filter Characteristics

  1. It has a large capacity and is highly automated. The six steps of filtration, extrusion, washing, secondary extrusion, and dry cake discharge are automatic and ongoing. It can produce six times more than a plate and frame filter press with the same filtering area.
  2. The cake’s moisture content should be as low as possible. This way, the maximum extrusion pressure can reach 1.6 MPa. Then, it’s dried by compressed air to get a low filter cake moisture content. The moisture can reach lower than 10% without considering crystal water. Sometimes, the ideal result can be achieved without the traditional process of drying. This saves a lot of energy.
  3. The washing step improves performance. The filter cloth can be used in both positive and negative modes and has self-cleaning properties. The filter cloth is placed horizontally, and the thickness of the filter cake is uniform. The cake can reach a thickness of up to 45 mm.
  4. Compact structure. Since it is a vertical device, it doesn’t take up much space on the ground. This can reduce the cost of the workshop.
  5. The equipment is controlled by the PLC control cabinet. It has self-detecting and auto-alarm functions.

Vertical Filter Press Working Principle

The process can be broken down into six stages, but in practice, you can mix and match these stages however you like.

(1) The slurry was pumped into all chambers. As the filtrate flows out, the filer cake forms.
(2) Membrane press 1: high-pressure water is pumped into the membrane in each chamber. This pushes the filter cake further, and more liquid flows out.
(3) Membrane Press 2: Water was pumped through the filter cake at high pressure, washing away the membrane. This process was efficient and used little water.
(4) The filter cake was dried in the last step of dehydration. Compressed air cools the filter cake to reduce its moisture again.
(5) The filter cake is removed from the chambers when the filter cake discharge system and the filter cloth plate and frame system are started.

Drawing of Vertical Press Filter

vertical filter press drawing

Vertical Filter Press Parameters

ModelFilter Area (m2)Filter Plate Size (mm)Filter Plates Quantity (pcs)Filter Pressure (Mpa)Extruding pressure (Mpa)Capacity (m3/h)
BLZG6/900×17506900×175040.3~0.60.8~1.61.44
BLZG9/900×1750962.16
BLZG12/900×17501282.88
BLZG15/900×175015103.6
BLZG18/900×175018124.32
BLZG21/900×175021144.32
BLZG25/1200×2620251200×2620106
BLZG30/1200×262030127.2
BLZG35/1200×262035148.4
BLZG40/1200×262040169.6
BLZG45/1200×2620451810.8
BLZG50/1200×2620505012
BLZG60/1500×4010601500×40101014.4
BLZG72/1500×4010721217.28
BLZG84/1500×4010841420.16
BLZG96/1500×4010961623.04
BLZG108/1500×40101081825.92
BLZG120/1500×40101202028.8
BLZG132/1500×40101322231.68
BLZG144/1500×40101442434.56
BLZG156/1500×40101562637.44
BLZG168/1500×40101682840.32

Free Quote

contact us

If you are interested in our products, don’t hesitate to contact us! You can contact us in any way that is convenient for you. We are available 24/7 via fax or email. You can also use the quick contact form below or visit our office. We would be happy to answer your questions.

Contact Form Demo
en_USEnglish
Scroll to Top

Get a free quote

Contact Form Demo